Tips For Replacing a Window Handle
It is simple to change your window handle in the convenience of your own home. Follow these guidelines to ensure a smooth and beautiful finish.
Start by removing the screws to expose the screws within the uPVC window handle. Then measure the spindle length to ensure that you receive the right size replacement.
1. Take a measurement of the Spindle Length
When replacing a window handle, it's important to determine the dimensions of the spindle correctly. It can influence the tightness or looseness of the handle, as well as whether the handle will lock correctly into the window frame. The spindle is a metal shaft that connects the handle to the lock in the frame of the window. The spindle could be an industry standard cross-section of 8mm or older 9mm versions. The modern industry standard is 8mm but this was not always the case. When purchasing a new handle, it's essential to check the dimensions.
The easiest way to measure the length of the spindle is take off the handle you have already installed This can be accomplished by turning it into the open position and unscrewing the two screws (which may be hidden behind plastic caps that will require removal) which hold the handle. After the handle is removed, take a measurement from the base to the point at which it ends. This will provide you with the measurements required to buy a replacement.
There are plenty of options to consider when selecting a new window handle from sleek chrome that fits in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more classic Tudor cottages with curled monkey tail latches! The possibilities are endless, but the most important thing is to select a style that is suitable for your home.
Espag handles are usually installed to uPVC window frames and are always the exact same size with a 43mm central. Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. Cadenza window handles have distinct dimensions as they feature an angle blade that operates the multi-point lock mechanism within the window.
When selecting a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are only used with windows that open in one direction.
2. Take the handle off
A window handle that falls out can be a hassle, regardless of regardless of whether the handle is damaged or worn out. However, the good part is that replacing a uPVC window handle is a very easy task you can complete yourself. You'll need only the most basic hand tools and time to complete the task.
You will need to first open the window and then ensure that it's not locked. Then, take off the screws that hold the handle in place. Once the screw caps have been removed you will be able to remove the handle.
The handle is attached to a spindle in the window frame. Depending on the kind, this is held in place either by a screw or pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both of these types of handles are employed on casement windows, including aluminium windows. They can be locked with a key to prevent unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle you will require a flat-bladed screwdriver. After the clip has been released, the handle will be able to slide off the spindle. After the handle has been removed, you'll be required to measure the length of the spindle and ensure that your new handle is compatible with the spindle's length.
Once you've determined the correct size for the handle, screw it in place. You will need to ensure that the new handle is firmly attached and that it turns in the correct way (clockwise for open and counterclockwise for closed). It is also crucial to make sure that it isn't fitted upside down.
Then, you must replace the screw cover caps. Once you've completed this step, you can test the handle to be sure it's functioning properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and then back.
3. Take the Screws off
A uPVC window handle is a crucial component of every home and is often the first thing to begin to show signs of wear and tear or damage. This could be due to natural factors or through regular use and sometimes even intentional damage caused by criminals who may wish to open a locked window and gain entry to your property. A simple repair can fix the problem and prevent it from occurring again.
UPVC handles can also be difficult to remove when the locking mechanisms aren't working correctly. It's often possible to solve the problem by replacing the multipoint locking mechanism instead of the whole handle. This could save you money.
After you've removed the old handle, you will need to remove the screws that secured it. These screws are usually found on the inside of the handle's base. You may require an screwdriver to do this, and it's important to not over tighten the screw as this could cause the handle to loosen.
Then, you'll need to locate the pins or screws that keep the handle in place. They are typically located on the inside of the base of the handle. You will need a screwdriver to take them off. After they've been removed, you'll need to replace the caps on the screws in the event that you want to do so and test the new handle to ensure it's working correctly.
Install the handle by adjusting the spindle to the window's cutout mechanism. Then screw it in. Make sure that the handle is in the open position and that the screws are tightly fixed before replacing the screws' covers, should you wish to do this. Then you can enjoy the new window handle. I hope this will enable you avoid having to pay for costly window and door replacement services in the future. Contact us if need more information on this or any other aspect of your uPVC window.
4. Fit the New Handle
If you're replacing a damaged handle or simply updating it the procedure is easy and can be accomplished in a matter of a few steps. The key is to identify the kind of handle, take measurements of its spindle and know what tools you'll need to complete the task. Safety is always the top priority when working with windows and tools. Make sure you follow the steps and make sure that you have the right handle for use.
The first step is to find the screws that hold your current window handle in place. Then, take them out, while maintaining an adequate grip on the handle itself to stop it from falling suddenly and causing injury. After Repair My Windows And Doors have been removed, you can place them in a secure location to be replaced in the future.
After removing the old handle, you are now able installing your new handle. The handle should be fitted perfectly in order to function correctly and keep the window in its closed position. Next move the square metal bar on the handle into the hole in the window mechanism.
Now that the new handle is installed, the final thing to do is to replace the screw caps and check to see if it works. If you aren't satisfied with the results or if the window does not open and close as it should then the next step is to contact our experts who can help.
Most UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to damage or wear. Anyone with some DIY knowledge can accomplish the task. It is important that the handle you choose matches the dimensions and style of the window. If you're not sure what kind of handle you'll require, please get in touch with our team who will be able to provide you with the possibilities available.